AFI is proud to use the approved commercial grade, dedicated products of Carboline Company, a world leader in industrial fire protection. Carboline offers “low-risk solutions” for some of the toughest design challenges facing the industry where steel is required to be protected from fire.
Their high-quality coatings are well-suited for protecting steel and concrete from corrosion, abrasion, and weathering as well as for providing passive fire protection for industrial and commercial applications.
Carboline Pyrocrete products offer an unbeatable level of performance for the refinery and petrochemical industries. Pyrocrete 241 and 240 High Yield are best suited for use in nuclear power plants. Pyrocrete 241 has been an industry-leading product for over 31 years and is currently the most widely specified product in the industry.
Read MoreThese products are cementitious inorganic formulations that use single powder components mixed with clean, potable water before application. These high-density products are designed for use on interior and exterior structural steel, bulkheads, and for upgrading the fire resistance of existing concrete.
It is recommended for use in offshore platforms, refineries, petrochemical, pharmaceutical facilities, pulp, and paper mills, as well as conventional power plants, factories, warehouses, institutional and biomedical facilities.
This product is a cementitious inorganic polymer formulation that uses a single powder component mixed with clean, potable water before it is applied. This product is recommended for structural steel, bulkheads, and for upgrading the fire resistance of existing concrete. This product is recommended for use at pharmaceutical facilities, power plants, penthouses, schools and hospitals, abatement spray and air plenums.
These two-component, epoxy-based, subliming coatings are thermally-activated, and spray applied directly to primed steel surfaces. This provides a durable and aesthetically pleasing finish that allows the shape of the steel to be maintained while also providing the specified level of fire resistance for your project. Thermo-Lag 3000 is the most effective epoxy-based intumescent coating in the market based on both the UL 1709 and Offshore Certifications.
This is a decorative, thin film fire-resistive coating system used for structural steel at interior locations in buildings. During a fire, this coating expands to form meringue-like insulating ash. The topcoat component of this system provides a wide range of colors to meet the needs of your project.
This is a single-component, subliming/intumescent, acrylic, thin film, fire resistive coating that is spray applied directly to primed steel surfaces. This coating provides a durable and aesthetically pleasing finish that allows the shape of the steel to be maintained while also providing the specified level of fire resistance.
These are single pack, solvent-based intumescent coatings best suited for fire protection of structural steel. These coatings are recommended for steel beams, columns, tubes, and pipes.
These two-component, epoxy-based, thermally-activated, subliming coatings are spray applied directly to primed steel surfaces. These coatings provide a hard and aesthetically pleasing finish that allows the shape of the steel to be maintained while providing the necessary level of fire resistance.
This is a noncombustible, inorganic product supplied as a single powder component that is mixed with clean, potable water before application. This product is intended for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors, and pre-cast concrete units to provide fire protection.
These inorganic formulations are supplied as a single powder component that is mixed with clean, potable water prior to application. These products are designed to fireproof interior structural beams, joists, walls, roofs, decks, girders, columns, electrified floors, and pre-cast concrete units.
This is a medium density, cementitious, noncombustible, inorganic product supplied as a single powder component that is mixed with clean, potable water for application. This product is best suited for application to interior structural columns, beams, roofs, joists, decks, walls, floors, girders, and pre-cast concrete units.
This is formulated explicitly for interior, high humidity areas. It is resistant to damage and moisture making it an excellent choice for use in high traffic areas like mechanical rooms, swimming pool areas, elevator shafts, parking garages and other areas that experience high humidity or excessive moisture.
This is a high density, cementitious, noncombustible, inorganic product that is supplied as a single powder component and is mixed with clean, potable water prior to application.
This product is best suited for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. TYPE 7HD™ is specifically formulated for interior areas where the potential for high humidity and damage from abuse and severe conditions exists.
It is damage and moisture resistant, serving as an excellent choice for interior use in high traffic areas such as mechanical rooms, elevator shafts, swimming pool areas, and parking garages.
This cementitious inorganic product formulation is supplied as a single powder component and is mixed with clean water before it is used in application. It is an excellent option for acoustics.
It highly recommended uses for the fire protection of structural steel, wood, bulkheads, and upgrading the fire resistance of any existing concrete. It is best suited for application in nuclear and conventional power plants, pharmaceutical facilities, pulp, and paper mills, factories, warehouses, acoustical, institutional, stadiums, and convention buildings.
Contact us today to request a bid or to learn more about how we can use Carboline Company Products to provide you with unmatched fire protection for your next project.